2892102 - 7010M20 repeair side door electrically operated window motor - r r with door panel-mount frame removed

Removing ( Refitting )  - 7010A04  rear side door water guard protection - r r or arrange with door panel removed1. Undo the bolts.2. Disconnect the wiring from the retainers.3. Remove the bracket. 1. Open the window (1a) about 1/4 of the way, then disconnect the window safety retainer (1b).2. Disconnect the window from the drive pin.3. Raise the window manually to the closed position; to prevent it descending accidentally, fit a supporting hook as shown in the figure.4. Disconnect the electrical connection of the electric window motor.

	Name	Connector
4	Rear left electric window motor	N65

	Name	Connector
4	Rear right electric window motor	N66

5. Undo the electric window unit nuts.6. Remove the electric window unit from the door frame. Refitting ( Removing ) Check the condition of the electrically-operated window and ensure the motor is working properly.Refit the electric window unit in the door frame, fixing it with its nuts.Connect the electrical connection for the electric window motor.Remove the window support hook.Open the window about 1/4 of the way, then connect it to the drive pin.Connect the window's safety retainer.Check that the electric window works properly. - 7010A04  rear side door water guard protection - r r or arrange with door panel removed