2892152 - 7030B66 sun-roof movement ecu - r+r

Removing ( Refitting )  - 3380A44  handbrake/linkage protection - r+r - 7040H34  central pillar trim - r r (left and right)  - 7040H42  rear pillar trim - r r (left and right)  - 7040B18  l/h or r/h side trim (one) of luggage compartment/load platform - arrange (left and right)  - 7040H33  glasses holder (1) lh or rh, on roof trim - r r (left and right)  - 7065C34  l/h or r/h sun blind (one) - r+r (left and right)  - 5580E22  Anti-theft device VOLUMETRIC SENSORS - R.R. after checking electrical circuit - 7040E50  front modular courtesy light unit - r+r - 7065C30  interior l/h or r/h grab handle (one) - r+r (all)  - 7040E17  lh or rh rear courtesy light - r r (left and right)  - 7030B32  sliding roof decorative seal(1) front or rear - r r (front and rear) - 7030B64 sun-roof control switch - r+r  - 7040H80  parcel rack1. Working on both sides of the vehicle, release the perimeter seal for the door housing in the area of the front pillar trim.2. On both sides of the vehicle, release the pillar trim from the inner retainers using the special tool, then lower it.

NameCountry
2Scraper blade1.878.077.000
1. Undo the bolts on the seat belt cover.2. Remove the cover.3. Remove the retainers using the appropriate tool.

NameCountry
3Scraper blade1.878.077.000
Tilt the front and rear seat backrests backwards.4. Remove the seals of the 4 door frames near the ceiling trim.5. Carefully lower the ceiling trim.
1. Disconnect the electrical connection for the control unit.

NameConnector
1Rear sun roof control unit  M83 
2. Loosen the bolts fixing the control unit mounting.3. Remove the mounting and the control unit.
1. If necessary, release the control unit (1a) from the support retainers (1b) and (1c) and keep it.
Refitting ( Removing ) Check that the control unit is undamaged.If removed, attach the control unit to the support retainers.Position the support and control unit and secure it using the bolts.Connect the electrical connection to the control unit.Position the ceiling trim.Fit the seals of the 4 door frames near the ceiling trim.Fit the cover on the central rear seat belt.Tighten the cover bolts.Engage the pillar trim on the retainers.Fit the sealing strip around the door compartment.Lift up the front and rear seat backrests. - 7040H80  parcel rack- 7030B64 sun-roof control switch - r+r  - 7030B32  sliding roof decorative seal(1) front or rear - r r (front and rear)  - 7040E17  lh or rh rear courtesy light - r r (left and right)  - 7065C30  interior l/h or r/h grab handle (one) - r+r (all)  - 7040E50  front modular courtesy light unit - r+r - 5580E22  Anti-theft device VOLUMETRIC SENSORS - R.R. after checking electrical circuit - 7065C34  l/h or r/h sun blind (one) - r+r (left and right)  - 7040H33  glasses holder (1) lh or rh, on roof trim - r r (left and right)  - 7040B18  l/h or r/h side trim (one) of luggage compartment/load platform - arrange (left and right)  - 7040H42  rear pillar trim - r r (left and right)  - 7040H34  central pillar trim - r r (left and right)  - 3380A44  handbrake/linkage protection - r+rCheck that all the components are correctly fitted and check that the rear sun roof is working properly (see Description and Operation - 7030).