2892311 - 7210B15 R.R. UNDERDOOR SIDE MEMBER

Removing ( Refitting )  - 7210A60  R.R. FRONT PILLAR - 7210B10  R.R. CENTRE PILLARCheck if any of the connected parts are deformed by checking body alignment dimensions. Use appropriate measurement tools (reference rigs, templates or gauges).Straighten the body if necessary. Use a grinding wheel to expose the spot welds.1. Open the lug securing the floor to the frame, shown in the figure.2. Use a chamfering machine to remove the weld spots shown in the figure.3. Use a hammer and chisel to remove the frame from the car. Correct any deformations in the panel using a hammer and profiled stake.1. Apply the electroweldable paint finish to the areas shown in the figure. Refitting ( Removing ) Use a rotary brush to remove the rust-proofing from the inner and outer edges of the part.1. Apply the electroweldable paint finish. 1. Position the part correctly on the car and secure using self-locking grippers.2. Use a spot welder and weld the areas shown in the figure.3. Attach the floor lug to the frame. 1. Correct any deformations in the panel using a profiled stake and mallet.Use a grinding wheel to remove the spot weld residues. 1. Apply rust-proofing to newly-welded areas.2. Apply sealant along the join lines between the part and car.3. Apply wax oil inside the rear wing. Refit all fouling parts. - 7210A60  R.R. FRONT PILLAR - 7210B10  R.R. CENTRE PILLAR