2892320 - 7210E20 R.R. BONNET LID
Removing
(
Refitting
)
Check that the components connected are not distorted by checking the bodyshell alignment measurements using suitable equipment (e.g. gauges).Straighten the body as necessary.Remove the bonnet lid. Op. 7025A14 L/H OR R/H BONNET LID SUPPORT DAMPER (ONE) - R+R
Refitting
(
Removing
)
Position the part on the stand and fit the catch.1. Position the part on the vehicle provisionally and secure without tightening the bolts.Check it is properly adjusted.2. Remove the bonnet lid from its housing by unscrewing the bolts indicated. | Remove the bonnet lid catch. |
