2889313 - E4090 NAVIGATOR - Description
Description
The navigation system informs you of the
vehicle's position on the map (in relation to both urban and non-urban/motorway
road networks).In this way, the driver is taken to the
desired destination, guided step-by-step by voice messages and visual
information. The system also provides additional information for reaching
services of general interest, such as hotels, car parks, restaurants,
chemists, service stations, hospitals, FIAT service outlets, railway
stations, airports, etc.The navigator is incorporated in the radio
unit: it is a BOSCH radio navigator personalized especially for
the FIAT MULTIPLA.The navigation system uses the GPS
(Global Positioning System) satellite location technology; it has
the following functions:
- vehicle location
- calculation of the route
- identification of 'route guidance' manoeuvres
- management of the map data base (on CD-ROM)
The navigation CD-ROM reader is located
in the unit itself. | The navigation system only operates
with the CD-ROM inserted in the special drive. however it is possible
to listen to a music CD during navigation. In this case, the navigation
function requires the map CD to be inserted during execution of
the route calculation procedures. |
The GPS system consists of an aerial which
allows the GPS satellite location of the vehicle: the aerial is
connected to the relevant receiver, located in the integrated unit,
via a specific shielded cable. The GPS aerial is fitted to the interior
rear view mirror.The vehicle position is identified by the
analysis of the GPS data and the speedometer and reverse gear signals
coming from the car. This position is shown on the monochromatic display
in the centre of the radionavigator. |
When the vehicle is new or after
any operation on the navigation system, the test and calibration
procedures must be carried out as indicated in
Characteristic
of working principle 5580N intergrated control
system (ics) panel
.
|
For more details
Characteristic of working principle 5580N intergrated control system (ics)
panel