2891310 - 1080E24 fuel vapour by-pass valve/solenoid - r + r
Removing
(
Refitting
)
Open the bonnet lid.1. Undo the four tabs (1a) to remove vapour cut-off solenoid (1b)
from its seat on the activated carbon filter. 2. Disconnect pipe (2a) by undoing collar (2b). 3. Disconnect the electrical connection and remove the cut-off solenoid. | Name | Connector |
|---|---|---|
| 3 | Fuel vapour recovery solenoid | L10 |
Refitting
(
Removing
)
Check the condition of the cut-off valve.Connect the electrical connection to the
vapour cut-out solenoid.Connect the evaporation control system
pipe.Fit the cut-off solenoid in its seat. Check
that the retaining tabs are correctly fitted. Close the bonnet lid.