2891849 - 5050B42 WINDSCREEN WIPER MOTOR - R+R

Removing ( Refitting )     Op. 5050B32 WINDSCREEN WIPER ARM/S - R+R (left and right sides)    Op. 7055A18 L/H OR R/H SIDE RUBBING STRIP DECORATIVE SEAL - R+R    Op. 5050B38 WINDSCREEN WIPER ASSEMBLY - R+R OR REPAIR1. Remove the motor protective boot.2. Mark the position (2a) of the control lever (2b).3. Undo the centre nut.4. Undo the bolts fixing the motor.5. Remove the windscreen wiper motor. Refitting ( Removing ) Check that the windscreen wiper motor is not damaged and, if necessary, conduct an electrical test.Before refitting the motor, zero it connecting it temporarily to the connector and activating it using the front windscreen wiper control.Refit the zeroed motor, with the control lever in the position marked during the dismantling stage.Tighten the bolts fixing the motor.Tighten the centre nut.Refit the motor protective boot.    Op. 5050B38 WINDSCREEN WIPER ASSEMBLY - R+R OR REPAIR    Op. 7055A18 L/H OR R/H SIDE RUBBING STRIP DECORATIVE SEAL - R+R    Op. 5050B32 WINDSCREEN WIPER ARM/S - R+R (left and right sides)Check that the windscreen wiper is working.