2892107 - 7010N20 rear side door lock motor/catch assembly - r r with door panel and support frame removed
Removing
(
Refitting
)
- 7010A04 rear side door water
guard protection - r r or arrange with door panel removed - 7010D22 rear side door descending window glass guide (one)
- r r with door panel (and support frame) removed1. Disconnect the linkages on the lock side.2. Unscrew the catch retaining bolts. 3. Move the lock over slightly.4. Disconnect the electrical connection then withdraw the lock. | Name | Connector |
|---|---|---|
| 4 | Left rear door lock geared motor | N55 |
| Name | Connector |
|---|---|---|
| 4 | Right rear door lock geared motor | N56 |
Refitting
(
Removing
)
Check that the lock is intact
and undamaged.Connect the electrical connection to the
lock.Fit the lock.Tighten the bolts.Connect the linkages on the lock side.Check that the lock works by operating
the outer handle. - 7010D22 rear side door descending window glass guide (one)
- r r with door panel (and support frame) removed - 7010A04 rear side door water guard protection - r r or arrange
with door panel removed