7045A10 L/H OR R/H FRONT SEAT (ONE) - R+R - Fiat - MULTIPLA - eLearn

2892219 - 7045A10 l/h or r/h front seat (one) - r+r

) 1. Disconnect the electrical connection (left seat only).

	Name	Connector
1	Driver's seat ride motor	N39

2. Undo the bolts securing the moulding.3. Remove the moulding.4. Undo the front bolts securing the seat.

1. Undo the bolts.2. Remove the protections.3. Undo the rear bolts securing the seat.4. Remove the seat.

Refitting ( Removing

) Check that the seat is not damaged.Fit the seat and screw on the front and rear bolts, without tightening them.Tighten the rear seat bolts.

	Fastening	Component	Ø	Value(daNm)
-	Rear bolt	FRONT SEAT ASSEMBLY.	M10 x 1.25	3.4

Fit the guards and fix them with the bolts.Tighten the front seat bolts.

	Fastening	Component	Ø	Value(daNm)
-	Front bolt	FRONT SEAT ASSEMBLY.	M10 x 1.25	3.4

Fit the moulding and secure with the bolts.Connect the electrical connection (left seat only).Check the operation of the seat.

Before removing and refitting the seat with the Air Bag module, the following preliminary operations must be carried out:- Place the ignition key in the OFF position and extract it;- Disconnect the battery leads and insulate.- Wait for 10 minutes before continuing.

FOLLOW ALL THE RECOMMENDED SAFETY RULES ( See assembly 5580C air bag system ).