186007249 - 1058A46 CNG PRESSURE/TEMPERATURE SENSOR ON SINGLE MANIFOLD PIPE - R.R. (BIPOWER)

Removing ( Refitting ) Position the vehicle on a lift.Drain the low pressure circuit as described in the operation    Op. 1042A02 C.N.G. - FUEL SYSTEM SAFETY CHECK1. Disconnect the electrical connection for the methane temperature and pressure sensor.
DescriptionConnector
Methane pressure/temperature sensorK57
2. Undo the methane pressure and temperature sensor and remove it from the CNG single manifold.
Refitting ( Removing ) Fit the methane pressure and temperature sensor in the housing on the CNG single manifold.Connect the electrical connection for the methane temperature and pressure sensor.
DescriptionConnector
Methane pressure/temperature sensorK57
Move the CNG cut-off solenoids to open position by hand and check system is efficient.Remove the vehicle from the lift.    Op. 1042A06 C.N.G. - FUEL SYSTEM CHECK FOR ANY LEAKS USING ELECTRONIC DETECTOR FOLLOWING OPERATIONS