2891205 - 1020D10 front crank shaft oil seal cover - r + r and replace seals with timing belt removed

Removing ( Refitting )  - 1032B44  toothed drive pulley - r + r with timing belt removed - 1020A20  crank case oil sump - r + r clean seals for sealant application1. Undo the retaining bolt.2. Withdraw the rpm sensor from its seat, open the retaining collar and place to one side.3. Undo the bolts securing the cover to the engine block.4. Remove the front cover and recover the seal.
Refitting ( Removing ) Replace the seal on the engine block.1. Remove sealing ring (1a) from the front cover by inserting a drift into groove (1b).
Fit the front cover to the engine block.Tighten the fixing bolts to torque.

FasteningComponentØValue(daNm)
-BoltCRANKSHAFT FRONT COVERM60.7
1. Use tool (1a) to fit new oil sealing ring (1b) in place.

NameCountry
1aFitting tool1.860.878.000
 - 1020A20  crank case oil sump - r + r clean seals for sealant application - 1032B44  toothed drive pulley - r + r with timing belt removed