2891245 - 1040A30 fuel filler pipe - r + r

Removing ( Refitting ) Place the car on a ramp.With the ignition key in the OFF position, disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1

 - 4450B11  WHEEL (one) rear - R.R.Raise the car.1. Undo the retaining bolts.2. Remove the plastic fuel filler pipe protection. 1. Unscrew the fuel filler fitting retaining bolts.2. Lower the upper part of the filler pipe as far as possible and disconnect the pipe leading to the tank from the vapour separator.3. Open collars (3a) and disconnect fuel filler pipe (3b) and pipe (3c) from the supplementary vapour separator to the tank.4. Disconnect both pipes leading from the evaporation control system to the float valves from their quick-release fittings, then remove the filler pipe together with the vapour separator.  - 1080E10  tank fuel vapour separator - r + r Refitting ( Removing )  - 1080E10  tank fuel vapour separator - r + rFit the fuel filler pipe together with the vapour separators.Connect the tank pipe to the vapour separator.Tighten the fuel filler fitting retaining bolts.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FUEL FILLER PIPE	M5	0.35

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FUEL FILLER PIPE	M6	0.8

Connect both pipes from the evaporation control system to the float valves to their quick-release fittings.Use new collars to secure the fuel filler pipe and the supplementary separator pipe from the tank.Fit the plastic filler pipe protection. - 4450B11  WHEEL (one) rear - R.R.With the ignition key in OFF position, connect the battery negative terminal.

	Name	Connector
-	Battery	A1

Remove the vehicle from the ramp.