2891816 - 5040B64 sensor on evaporator for a/c ecu - r + r

Removing ( Refitting )  - 7040L20  tunnel trim - r r - 7040A09  passenger air bag compartment cover - r r - 2125C24  gear lever knob - r + r - 7065C10  air conditioning control panel - r+r - 7040A11  control panel lid - r + r - 5560B10  analogue control panel - r+r - 5570T80  car radio unit - r+r - 7040A77  glass holder on facia trim - r r - 7065C42  ashtray (one) r+r - 7010M16  rear electric window enablement switch - r+r - 7040A96  facia glove compartment flap (1) lh or rh - r r (left and right sides)  - 7040A37  fuse box cover - r r - 5580C26  LOCK BARREL KEY/SWITCH for deactivating passenger 'AIR BAG - R.R. - 7040A44  facia lh side cover - r r - 7040A45  facia rh side cover - r r - 7040A25  central facia trim - r r - 5540C18  headlamp/light cluster alignment correction motor switch - r+r - 7025A24  boot lid opening lever - r+r - 7040L42  sill plate connection of one front door (1), lh or rh - r r (left and right sides)  - 7040A04  facia lower trim-r r Drain the coolant fluid (refer to op.   5040A10  Air conditioning refrigerant CIRCUIT - Draining and Refilling ).  - 5010B24  under-facia air ducts r r - 5580C22  AIR BAG MODULE - Passenger side - R.R.
Before working on the Air Bag system, follow the safety instructions for working on the system very carefully (  See assembly 5580C   air bag system ).
 - 5530B10  battery - r+r - 1048A10  air cleaner filtering element - replace  - 5040C12  air conditioner housing - r r with facia disconnected1. Disconnect the electrical connection for the air intake actuator.

NameConnector
2Air intake actuator  N82 
2. Undo the bolts.3. Remove the cover.4. Move the seal.5. Undo the bolt.6. Move the evaporator.7. Disconnect the frost sensor for the evaporator.8. Undo the bolt.9. Disconnect the electrical connection for the frost sensor.

NameConnector
9Air intake actuator  N82 
10. Disconnect the cable for the frost sensor from the retainer and recover the frost sensor unit.
Refitting ( Removing ) Check that the sensor is not damaged.Position the frost sensor on the evaporator.Connect the frost sensor cable to the retainer.Connect the electrical connection and tighten the bolt.Place the evaporator in the housing and tighten the bolt.Connect the electrical connection. - 5040C12  air conditioner housing - r r with facia disconnected  - 1048A10  air cleaner filtering element - replace - 5530B10  battery - r+r - 5580C22  AIR BAG MODULE - Passenger side - R.R. - 5010B24  under-facia air ducts r r Repressurize the coolant fluid (refer to op.   5040A10  Air conditioning refrigerant CIRCUIT - Draining and Refilling ).  - 7040A04  facia lower trim-r r - 7040L42  sill plate connection of one front door (1), lh or rh - r r (left and right sides)  - 7025A24  boot lid opening lever - r+r - 5540C18  headlamp/light cluster alignment correction motor switch - r+r - 7040A25  central facia trim - r r - 7040A45  facia rh side cover - r r - 7040A44  facia lh side cover - r r - 5580C26  LOCK BARREL KEY/SWITCH for deactivating passenger 'AIR BAG - R.R. - 7040A37  fuse box cover - r r - 7040A96  facia glove compartment flap (1) lh or rh - r r (left and right sides)  - 7010M16  rear electric window enablement switch - r+r - 7065C42  ashtray (one) r+r - 7040A77  glass holder on facia trim - r r - 5570T80  car radio unit - r+r - 5560B10  analogue control panel - r+r - 7040A11  control panel lid - r + r - 7065C10  air conditioning control panel - r+r - 2125C24  gear lever knob - r + r - 7040A09  passenger air bag compartment cover - r r - 7040L20  tunnel trim - r r