5510C14 IGNITION COIL/S - R+R - Fiat - MULTIPLA - eLearn

2891884 - 5510C14 ignition coil/s - r+r

) 1. Disconnect the electricaly supply connection for the ignition coils.

	Name	Connector
1	Ignition coil	A30

2. Disconnect the high tension leads for the spark plugs from the coils.3. Undo the bolts fixing the coils to the mounting.4. Remove the ignition coils.

If necessary, remove the ignition coils mounting following the steps described below.1. Open the bands retaining the electrical wiring.2. Undo the nuts fixing the coils mounting to the camshaft housings.3. Remove the ignition coils mounting.

Refitting ( Removing

) Check that the coils are not damaged.If removed, refit the ignition coils mounting.Tighten the fixing nuts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	IGNITION COIL SUPPORT	M7	1.5

Position the ignition coils.Tighten the bolts fixing the coils to the mounting.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	IGNITION COIL/REEL	M6	0.9

Connect the high tension leads for the spark plugs to the coils.Connect the electrical supply connection for the ignition coils.Check the operation of the ignition system.