2892092 - 7010D34 rear side door manual window mechanism - r r with door panel and mount frame removed

Removing ( Refitting )  - 7010A04  rear side door water guard protection - r r or arrange with door panel removed1. Undo the bolts.2. Disconnect the wiring from the retainers.3. Remove the bracket. 1. Open the window (1a) about 1/4 of the way, then disconnect the window's safety retainer (1b).2. Disconnect the window from the drive pin.3. Manually raise the window to the closed position; fit a support hook as shown in the figure to prevent accidental lowering of the window.4. Undo the electric window unit nuts.5. Remove the electric window unit from the door frame. Refitting ( Removing ) Check the condition of the electric window unit.Refit the electric window unit in the door frame, securing it with its nuts.Remove the window support hook.Open the window about 1/4 of the way, then connect it to the drive pin.Connect the window's safety retainer.Check that the electric window works properly. - 7010A04  rear side door water guard protection - r r or arrange with door panel removed