2892342 - 1020A24 crank case oil sump - r + r clean seals for sealant application with engine removed
Removing
(
Refitting
)
- 1004D40 engine - position on stand and remove1. Undo the bolts fixing the oil sump to the cylinder block/crankcase.2. Using the tool (2a), cut the silicon sealant along the entire
perimeter of the oil sump. | Name | Country |
|---|---|---|
| 2a | Blade | 1.870.718.000 |
Refitting
(
Removing
)
Clean the crankcase and oil sump contact
surfaces to remove traces of silicone sealant.Apply silicone sealant around the edge
of the crankcase sump.Fit the oil sump to the crankcase.Tighten the oil sump fixing bolts to torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | OIL SUMP | M6 | 0.9 |