1058AE GAS/PETROL SELECTION FUEL SUPPLY CHECK (BIPOWER) - Fiat - MULTIPLA - eLearn

With the equipment set to the Voltmeter function, check that, with the ignition ON and the selector button switched to Gas (button released) on entry to the Metafuel 5D0 control unit the voltage at pin 47 is 0V and the ideogram with the green light in the button is off.
Switch the selector button to Petrol (button pressed) and check that on entry to the Metafuel 5D0 control unit the voltage at pin 47 is 12 V and the ideogram with the green light in the button is on.