5580C18 AIR BAG MODULE - R+R - Fiat - MULTIPLA - eLearn

2891972 - 5580C18 AIR BAG MODULE - R+R

) 1. Undo the bolts.2. Move the Air Bag module slightly.3. Release the safety tabs (3a), (3b). 4. Disconnect the electrical connections (4a), (4b).

Place the Air Bag module in the special cupboard, resting it on a free surface with the bag facing upwards.

Refitting ( Removing

) Follow these precautions.

Handle the Air Bag module with extreme caution. Make sure that the battery is disconnected.

In the case of replacement, position the appropriate labels.

Detach the removable part of the adhesive label from the new module and put it in a specific file recording the vehicle details (model, registration data, chassis no.) and the serial no. of the old module. This file should be kept for future checks. A new label is supplied together with the module, to be stuck on top of the existing one. However, it should first be perforated to indicate the month and 14 years after the year when the module is fitted (e.g. 2016 will correspond to 2002). Reconnect the electrical connections and attach the safety tabs.Refit the Air Bag module.Tighten the bolt to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	AIR BAG MECHANICAL MODULE	M6	0.8

Connect the battery.Check the operation of the system using the Examiner or another tester.