5580H36 PARKING SENSOR SYSTEM REAR SENSOR (1), LH OR RH - R R - Fiat - MULTIPLA - eLearn

2891994 - 5580H36 parking sensor system rear sensor (1), lh or rh - r r

) Raise the car at the rear1. Working inside the bumper, rotate the rear sensor concerned (which has a bayonet fitting) in a clockwise direction and extract it.2. Disconnect the electrical connections (2a, 2b).

	Name	Connector
2a	Parking sensor unit	K97B

	Name	Connector
2b	Parking sensor unit	K97C

3. If necessary, remove the bush from the bumper from the outside.

Refitting ( Removing

) Check that the sensor is not damaged.If removed, fit the bush on the bumper.Connect the electrical connection.Fit the sensor in the housing and rotate it.Lower the vehicle.Check the operation of the device.