7050A91 REAR SEAT BACKREST COVER - .R.R WITH SEAT REMOVED - Fiat - MULTIPLA - eLearn

2892246 - 7050A91 Rear seat backrest COVER - .R.R with seat removed

) - 7050B12 rear seat head restraint - r r - 7050A96 rear seat guard (one) - r r (right and left) - 7050A17 oddment holder on central rear seat squab - r r (central seat only) 1. Remove the head restraint guides.

1. Disconnect the bottom rear edge of the squab cover.Start from one end.2. Disconnect the front end from the frame retainer.

1. Remove the cover (1a) from the padding to gain access to the retaining rings (1b) then cut them.2. Remove the cover complete with padding.

1. If necessary, separate the cover (1a) from the padding (1b) after cutting the four rings (1c).

Refitting ( Removing

) Check that the cover is intact and shows no signs of damage.If removed, refit the cover on the padding and secure it with the four rings.Fit the cover with padding onto the squab frame and secure it with the two rings.Fit the cover fully onto the padding.Connect the front end of the cover to the frame retainer.Also connect the rear end of the cover.Fit the head restraint guides.Mould the cover onto the padding. - 7050A17 oddment holder on central rear seat squab - r r (central seat only) - 7050A96 rear seat guard (one) - r r (right and left) - 7050B12 rear seat head restraint - r r