2891350 - 1008C10 power unit upper reaction link r r

Removing ( Refitting ) Open the bonnet lid.1. Unscrew the retaining nuts.2. Disconnect fuel filter electrical connections (2a) and (2b).

	Name	Connector
2a	Diesel heater resistance	O20

	Name	Connector
2b	Diesel heater resistance	O20

3. Place the fuel filter outside the working area. 1. Unscrew both retaining bolts.2. Remove the reaction link. Refitting ( Removing ) Fit the reaction rod in its seat.Screw in the link retaining bolts and then tighten to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REACTION ROD	M10 x 1.25	5

	Fastening	Component	Ø	Value(daNm)
-	Nut	REACTION ROD	M10 x 1.25	5

Fit the fuel filter in its seat.Tighten the retaining nuts.Connect the fuel filter electrical connections.

	Name	Connector
-	Diesel heater resistance	O20

	Name	Connector
-	Diesel heater resistance	O20

Close the bonnet lid.