2891420 - 1060G80 ds electric injection control unit - r r

Removing ( Refitting ) Open the right side door.1. Disconnect the electrical connection from the injection electronic control unit.

	Name	Connector
1	Engine management ECU	M10

2. Unscrew the retaining nuts.3. Remove the control unit. Refitting ( Removing ) Fit the control unit in its seat.Tighten the nuts.

	Fastening	Component	Ø	Value(daNm)
-	Nut	DS PRESSURE PUMP INJECTION - ECU	M6	0.6

Connect the electrical connections.