2891542 - 2110D50 single flange on differential - r + r with drive shaft removed
Removing
(
Refitting
)
1. Using a suitable lever, prise off the drive shaft inner mounting
shaft from the differential.2. Undo the fixing bolts (2a) and remove the flange (2b) complete
with oil seal.Remove the adjustment shim.
Refitting
(
Removing
)
Fit the adjustment shim.Fit the flange, tightening the bolts to
torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | GEARBOX INTERNAL LINKAGE | M10 x 1.25 | 4.9 |