2891562 - 2710A24 differential end constant velocity joint (one) l/h or r/h - r + r with drive shaft removed - includes boot replacement

Removing ( Refitting ) 1. Remove the two clips (1a) and (1b) securing the protective gaiter (1c).2. Clean the grease off the inside of the constant velocity joint and remove the circlip from its seating.3. Withdraw the joint from the drive shaft and then remove the protective gaiter. Refitting ( Removing ) Wash the joint thoroughly using diesel or petrol, and visually check that there are no signs of seiaure or scoring on the balls and their seats.Fit the new protective gaiter.Fit the joint on the drive shaft and secure it with a new circlip.Fill the gaiter and joint with specific TUTELA MR2 grease.Secure the protective gaiter using new clips.