2891718 - 4420A30 l/h or r/h rear suspension damper (one) - r+r

Removing ( Refitting ) Position the vehicle on a lift and raise it.1. Partly compress the suspension using a hydraulic jack.2. Undo the upper bolt fixing the shock absorber to the rear axle.3. Undo the lower nut fixing the shock absorber to the track control arm.4. Remove the rear shock absorber.
Refitting ( Removing )
Follow these instructions for replacing the shock absorbers.
If the mileage for the shock absorbers is more than 20,000 - 25,000 Km, always replace both shock absorbers for each axle together, taking care to fit the same type of shock absorbers from those available as spares on the same axle.If the mileage for the shock absorbers is below 20,000 - 25,000 Km, then one shock absorber only can be replaced, as long as the new one is the same type and after having checked that the other shock absorber is in perfect working order.Fit the rear shock absorber.Tighten the upper bolt fixing the shock absorber to the rear axle to torque.

FasteningComponentØValue(daNm)
-BoltREAR DAMPER ATTACHMENTM10 x 1.257
Tighten the lower nut fixing the shock absorber to the track control arm to torque.

FasteningComponentØValue(daNm)
-NutREAR DAMPER ATTACHMENTM12 x 1.258.8
Remove the hydraulic jack.Lower the car and remove it from the ramp. - 4450A40  rear wheel geometry - check using optical equipment