2891906 - 5530A18 alternator - dismantle and rebuild - wash and check including component replacement if necessary
Removing ( Refitting ) - 5530A30 alternator pulley or fan - r+r with alternator removed - 5530A24 alternator voltage regulator - r r with alternator removed1. Undo the bolts fixing the diode rectifier plate.2. Using a metal-cutter, open the electrical connections (2a) retaining the diode rectifier plate (2b).3. Remove the diode rectifier plate.4. Undo the bolts fixing the half cover.
1. Remove the half cover and rotor.
1. Work on the press and remove the rotor (1a). In order not to
damage the contacts (1b), apply pressure using the extractor to
the shaft centre casing (1c) only. 2. With the aid of an extractor, remove the diode side bearing (2a).
In order not to damage the contacts, follow the instructions given
previously.
1. Undo the bolts.2. Remove the plate.3. With the help of a mallet, extract the bearing.
Refitting
(
Removing
)
Check that the dismantled components are
not damaged.Clean the dismantled components thoroughly.
The alternators are fitted with condensers with long life batteries. Whilst washing the alternator components, it is possible that immersion in the washing fluid may give rise to a discharge from the condenser with the possible ignition of flammable liquids. . |