2891183 - 1008A42 gear box left rigid mount - r r
Removing
(
Refitting
)
Place the car on a ramp.Raise the car.Place a hydraulic column jack beneath the
gearbox in order to work in safety.1. Unscrew the bolt securing the mount to the block and withdraw.2. Undo the bolts securing the block to the gearbox.3. Remove the engine block.
Refitting
(
Removing
)
Fit the rigid mount and tighten the retaining
bolts to torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | GEARBOX SIDE RUBBER MOUNT | M12 x 1.25 | 8 |