2891185 - 1008A46 cam shaft left rigid mount - r r

Removing ( Refitting )  - 4450B10  Front WHEEL (one) - R.R.- 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R.  - 1092G10  single engine belt r r - 1092A12  crankshaft pulley - r+r for versions with air conditioner1. Position a hydraulic jack under the motor.2. Unscrew retaining bolts (2a) and remove rigid engine mount (2b). Refitting ( Removing ) Fit the timing side rigid engine mount and secure it by tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT RUBBER MOUNTS	M12 x 1.25	8

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ENGINE MOUNT TIMING SIDE	M10	4.2 - 5.2

Remove the hydraulic jack. - 1092A12  crankshaft pulley - r+r for versions with air conditioner - 1092G10  single engine belt r r- 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R.  - 4450B10  Front WHEEL (one) - R.R.