2891292 - 1076B34 front catalytic converter attachment seal - replace
Removing
(
Refitting
)
Place the car on a ramp.1. Undo the bolts securing the pipe to the catalytic converter.2. Release rubber block (2a) from pipe pin (2b).3. Remove the gasket from its seat.
Refitting
(
Removing
)
Fit the gasket into its seat on the catalytic
converter.Secure the pin to the rubber block.Tighten the bolts securing the pipe to
the catalytic converter. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | EXHAUST PIPE TO ENGINE | M8 | 2.4 |