2891326 - 1088B20 engine cooling radiator - r + r
Removing
(
Refitting
)
- 1088E10 radiator cooling fan - r + rPosition a suitable container for recovering
the coolant fluid.Undo the drain plug in the lower part of
the radiator.1. Disconnect the coolant hose clamps from the radiator.2. Undo the bolts securing radiator to evaporator.3. Undo the bolts securing the radiator to the crossmember.4. Remove the radiator by prising off the underlying rubber pins.
Refitting
(
Removing
)
Check the condition of the radiatorFit the radiator in its seat by fastening
the rubber pins in the seat to the lower support beam.Tighten the bolts securing the radiator
to the upper beam.Tighten the bolts securing the radiator
to the evaporator.Connect the rubber hoses to the thermostat
and the rigid pipe.Ensure that the grooves on the hose fit
over the ridges on the rigid pipe sections on the radiator and pump water
intake. Secure the hose using new collars. - 1088E10 radiator cooling fan - r + r- 1088A10 Engine COOLANT - Check density' and top up level,
if necessary