2891357 - 1020A46 oil sump bulkhead - r r
Removing
(
Refitting
)
1. Unscrew fitting (1a) and remoe the condensed oil return pipe.2. Unscrew retaining bolts (2a) and remove vibration-proof partition
(2b) fastened to the oil sump.
Refitting
(
Removing
)
Fit the vibration-proof partition into
its seat in the oil sump.Tighten the retaining bolts.Fit the condensed oil return pipe.Tighten the fitting.
Removing
(
Refitting
)
1. Remove the connector for the condensation oil return pipe to
the sump.2. Remove the inner connector for the condensation oil return pipe
to the sump complete with O-ring.3. Undo the bolts (3a) and remove the crankcase oil sump partition
(3b).
Refitting
(
Removing
)
Fit the crankcase oil sump partition and
fix it tightening the bolts to torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | OIL BULK HEAD | M6 | 0.5 ÷ 0.6 |