2891414 - 1060G20 Engine RPM SENSOR - R.R.
Removing
(
Refitting
)
Place the vehicle on a lift.Disconnect the battery negative (-) terminal.1. Disconnect the condensed oil return pipe from the sump.Disconnect the electrical connection for
the rpm and timing sensor.2. Undo bolts (2a) and remove rpm and timing sensor (2b). | Name | Connector |
|---|---|---|
| 2b | RPM sensor | K46 |
Refitting
(
Removing
)
Fit the rpm and timing sensor and tighten
the retaining bolt.Connect the electrical connection.Connect the condensed oil return pipe
to the sump.Connect the negative (-) battery terminal.Remove the vehicle from the ramp.