2892307 - 7210A55 R.R. PILLAR PANEL BRACKET/REINFORCEMENT

Removing ( Refitting ) Open the bonnet.Check if any of the connected parts are deformed by checking body alignment dimensions. Use appropriate measurement tools (reference rigs, templates or gauges). 1. Disengage the retaining lugs (1a) and release the secondary junction unit (1b) from the side piece connecting bracket. 1. Using the expansion button (1a), remove the connector (1b) and set it aside. 1. Undo the bolts shown in the figure.2. Remove the front side piece/pillar reinforcement bracket. Refitting ( Removing ) 1. Fit the bracket on the car.2. Tighten the bolts shown in the figure.Refit the connector and secondary junction unit. Refit fouling parts.