2891372 - 1036B10 overhead camshaft - r r on vehicle

Removing ( Refitting )  - 4450B10  Front WHEEL (one) - R.R. - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 1092G10  single engine belt r r - 1092A12  crankshaft pulley - r+r for versions with air conditioner - 1032D12  timing system protective cover(s) - r + r - 1016A10  sound-proofing cover - r + r - 1008C10  power unit upper reaction link r r - 1008C14  engine link bracket - r r - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner - 1032B40  toothed-driven pulley (one) - r + r with timing belt removed - 1016A20  single cam cover - r + r and replace gasket - 3330D30  vacuum pump - r+r1. Unscrew retaining bolt (1a) and remove camshaft journal lubrication pipe (1b).2. Undo bolts (2a) and remove camshaft caps (2b).3. Remove camshaft (3a) with oil seal (3b). Refitting ( Removing ) Fit the camshaft to the cylinder head.Tighten the cap retaining bolts.Fit the lubrication pipe and secure by tightening the retaining bolts.Tighten the cap bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAMSHAFT CAPS	M6	1

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAMSHAFT CAPS	M7	1.5

1. Use tool (1a) to fit new oil seal (1b) to the camshaft.

	Name	Country
1a	Fitting tool	1.860.824.000

 - 3330D30  vacuum pump - r+r - 1016A20  single cam cover - r + r and replace gasket - 1032B40  toothed-driven pulley (one) - r + r with timing belt removed - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner - 1008C14  engine link bracket - r r - 1008C10  power unit upper reaction link r r - 1016A10  sound-proofing cover - r + r - 1032D12  timing system protective cover(s) - r + r - 1092A12  crankshaft pulley - r+r for versions with air conditioner - 1092G10  single engine belt r r - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. - 4450B10  Front WHEEL (one) - R.R.