2891753 - 4450D10 hub of one rear wheel, l/h or r/h - r+r with wheel removed
Removing
(
Refitting
)
Operation to be carried out
with the vehicle on a lift.Lift up the handbrake lever. - 4450D70 hub cap of one rear wheel, l/h or r/h - r+r
.
1. Undo the rear wheel hub nut.
 | The rear hub bearing should not be dismantled from the hub. If it proves necessary on account of noise or excessive clearance, replace the rear hub complete with bearing. |
Refitting
(
Removing
)
Fit the rear hub, complete
with spacers, on the stub axle. - 3320B30 lh or rh rear brake drum (one) r r
.
Lower the vehicle.Completely raise the handbrake lever.Tighten the rear wheel hub nut to torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Nut | REAR WHEEL HUB WITH BEARINGS | M22 x 1.5 | 28 |
| The rear wheel hub nut should be replaced at each dismantling. |