2891200 - 1020A20 crank case oil sump - r + r clean seals for sealant application

Removing ( Refitting )  - 1016A10  sound-proofing cover - r + r - 1084A16  oil dip stick pipe - r r - 1076B50  exhaust pipe attachment to engine - r + r1. Position a hydraulic jack beneath the engine mount.2. Undo the retaining bolts.3. Remove the rear engine mount together with the flexible block.
1. Disconnect the condensed oil return pipe from the oil vapour separator from the crankcase sump.2. Unscrew the drain plug and collect the oil in a suitable container.Close the oil plug.3. Undo the bolt connecting the oil sump to the intermediate shaft support.
Position a column jack beneath the engine oil sump.1. Unscrew the bolts securing the oil sump to the gearbox - differential unit.2. Use tools (2a) and (2b) to unscrew front and rear bolts (2c) and side bolts (2d) securing the sump to the crankcase.

NameCountry
2aKey1.860.833.000

NameCountry
2bKey1.860.834.000
3. Use a blade to cut the sealant around the perimeter of the oil sump.

NameCountry
3Blade1.870.817.000
Lower the hydraulic jack while supporting the oil sump.4. Remove the engine oil sump.
Refitting ( Removing ) Clean the oil sump and engine crankcase surfaces carefully to remove all remaining sealant.Apply silicone sealant around the perimeter of the engine oil sump.Fit the engine oil sump.Use a hydraulic jack to hold the oil sump in contact with the crankcase.Use the same tool used for dismantling to tighten the bolts securing the engine oil sump to the crankcase to torque.

NameCountry
-Key1.860.833.000

NameCountry
-Key1.860.834.000

FasteningComponentØValue(daNm)
-BoltOIL SUMPM60.9

FasteningComponentØValue(daNm)
-BoltOIL SUMPM82.5
Remove the hydraulic jack.Connect the condensation oil return pipe from the oil vapour separator to the crankcase sump.Fit the rear engine mount together with the flexible block and tighten the retaining bolts to torque.

FasteningComponentØValue(daNm)
-BoltINTERM RUBBER MOUNTM83.5
 - 1076B50  exhaust pipe attachment to engine - r + r - 1084A16  oil dip stick pipe - r r - 1016A10  sound-proofing cover - r + r