1032B14 TOOTHED TIMING BELT - R + R FOR TIMING ADJUSTMENT OR REPLACEMENT VERSIONS WITH AIR CONDITIONER - Fiat - MULTIPLA - eLearn

2891366 - 1032B14 toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner

) - 4450B10 Front WHEEL (one) - R.R.- 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 1092G10 single engine belt r r - 1092A12 crankshaft pulley - r+r for versions with air conditioner - 1032D12 timing system protective cover(s) - r + r - 1016A10 sound-proofing cover - r + r - 1008C10 power unit upper reaction link r r - 1008C14 engine link bracket - r r1. Turn the crankshaft in its normal direction of rotation to align the notch on the toothed timing pulley (1a) with the notch on the cam cover (1b) (cylinder no. 1 at T.D.C.).

1. Loosen the semi-automatic tensioning device nut.2. Remove the timing belt.

Refitting ( Removing

) 1. Remove the engine oil pump retaining bolt.2. Fit the timing belt over the crankshaft gear.3. Fit the pin of the tool for setting the engine to TDC.4. Turn the crankshaft a little at a time to allow locating dowel (4a) on the pulley to fit into the hole on tool (4b).

	Name	Country
3	Template	1.860.905.000

5. Lock the tool in position using a nut (5a) and ordinary bolt (5b).

1. Turn the toothed pulley so that the timing notches are aligned.2. Finish fitting the timing belt, following the route shown.3. Adjust the semi-automatic tensioner to bring the tensioner pointer (3a) to the maximum tension position, then lock nut (3b).Remove the tool for checking T.D.C.

	Name	Country
-	Template	1.860.905.000

Rotate the crankshaft through two revolutions in its normal direction of rotation.4. Slacken the nut securing the tensioner and carefully line up tensioner pointer (4a) with reference hole (4b), then tighten tensioner nut (4c) to torque.

	Fastening	Component	Ø	Value(daNm)
4c	Bolt	MOBILE TIMING TENSIONER	M6	2.5

- 1008C14 engine link bracket - r r - 1008C10 power unit upper reaction link r r - 1016A10 sound-proofing cover - r + r - 1032D12 timing system protective cover(s) - r + r - 1092A12 crankshaft pulley - r+r for versions with air conditioner - 1092G10 single engine belt r r- 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R. - 4450B10 Front WHEEL (one) - R.R.