3310A30 FRONT BRAKE CALIPER (ONE) - R.R. - Fiat - MULTIPLA - eLearn

2891571 - 3310A30 FRONT BRAKE CALIPER (one) - R.R.

) - 4450B10 Front WHEEL (one) - R.R.1. Remove the fixing spring (1a), using the tool (1b) undo the connector (1c) for the brake pipe.2. Release the rubber retainer (2a) for the brake pipe from the housing (2b) in the suspension damper.3. Disconnect the electrical connection for the brake pad wear cable.4. Remove the spring fixing the brake caliper to the bracket.5. Remove the rear bolt covers (5a), undo the bolts (5b) underneath, then remove the complete front brake caliper (5c).

	Name	Country
1b	Box wrench for brake fittings	1.856.132.000

Refitting ( Removing

) Fit the front brake caliper on the disc.Fix the brake caliper tightening the two rear fixing bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT BRAKE CALIPER ASSEMBLY	M8	2.4

Fit the caliper fixing spring in the correct position.Connect the brake pad wear electrical connection.Tighten the pipe connector to torque, secure the pipe on the suspension damper and fit the brake pipe fixing spring.

	Fastening	Component	Ø	Value(daNm)
-	Nut	FITTING FOR PIPE TO CALIPER	M10	1.4

- 3330A10 BRAKE FLUID - Check level and top up, if necessary. - 3330A14 HYDRAULIC BRAKING SYSTEM - Bleed air - 4450B10 Front WHEEL (one) - R.R.Remove the vehicle from the ramp.