2891626 - 3330C60 LOAD PROPORTIONING VALVE (one), left or right - R.R. - Includes adjustment.

Removing ( Refitting ) Place the car on the ramp.Disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1

1. Disconnect the connectors (1a) using a 13 mm spanner (1b).2. Disconnect the connectors (2a) using the spanner (2b).

	Name	Country
2b	Box wrench for brake fittings	1.856.132.000

3. Disconnect the load proportioning valve spring. 1. Undo the fixing bolts (1a) and remove the load proportioning valve (1b). Refitting ( Removing ) Proceed as follows.

The new load proportioning valve must be fitted with the car on a lift and the suspension unloaded (the wheels should hang).

Place the load proportioning valve in its original position, then tighten the fixing bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	LOAD PROPORTIONING VALVE	M6	0.8

Attach the eyelet for the traction spring to the opening in the bracket on the rear axle.Connect the pipe connectors and tighten them to torque using the tool.

	Name	Country
-	Box wrench for brake fittings	1.856.132.000

	Fastening	Component	Ø	Value(daNm)
-	Connector	LOAD PROPORTIONING VALVE	M10 x 1	1.6

Connect the pipe connectors and tighten them to torque using the 13 mm spanner.

	Fastening	Component	Ø	Value(daNm)
-	Connector	LOAD PROPORTIONING VALVE	M12 x 1	1.6

- 0010T64 brake and or clutch fluid check level and top up as necessary . - 0010T65 hydraulic brake system bleed air .  - 3330C62  load proportioning valve control - check and adjust . Connect the battery negative terminal.

	Name	Connector
-	Battery	A1

Remove the car from the ramps.