2891849 - 5050B42 WINDSCREEN WIPER MOTOR - R+R

Removing ( Refitting )     Op. 5050B32 WINDSCREEN WIPER ARM/S - R+R (left and right sides)     Op. 7055A18 L/H OR R/H SIDE RUBBING STRIP DECORATIVE SEAL - R+R .     Op. 7040H30 FRONT PILLAR TRIM - R R .     Op. 7055A20 L/H OR R/H SIDE RUBBING STRIP DECORATIVE SEAL - R+R .     Op. 5050B38 WINDSCREEN WIPER ASSEMBLY - R+R OR REPAIR1. Remove the motor protective boot.2. Mark the position (2a) of the control lever (2b).3. Undo the centre nut.4. Unscrew the motor retaining bolt.5. Remove the windscreen wiper motor. Refitting ( Removing ) Check that the windscreen wiper motor is not damaged and, if necessary, conduct an electrical test on it.Before refitting the motor, zero it by temporarily connecting it to the connector and activating it through the front windscreen wiper control.Refit the zeroed motor with the control lever in the position marked during the dismantling.Tighten the bolts fixing the motor.Tighten the centre nut.Refit the motor protective boot.    Op. 5050B38 WINDSCREEN WIPER ASSEMBLY - R+R OR REPAIR .     Op. 7055A20 L/H OR R/H SIDE RUBBING STRIP DECORATIVE SEAL - R+R .     Op. 7040H30 FRONT PILLAR TRIM - R R .     Op. 7055A18 L/H OR R/H SIDE RUBBING STRIP DECORATIVE SEAL - R+R .     Op. 5050B32 WINDSCREEN WIPER ARM/S - R+R (left and right sides) Check the operation of the windscreen wiper.