The two-way switch controlling mirrors
H31 operates electrical motors located in the right and left electrically-operated
door mirrors P60and P61 respectively.
The switch is supplied when the ignition
is switched on (INT/A) by the line for fuse
B27 at pins
4 and 1 of H31, whilst pin 2 is earthed.
Operating the switch in one direction or
the other, sends one of the two motors a positive and an earth signal,
thereby determining the direction of rotation. The motors which
adjust the vertical position are connected to pin 5 of the mirrors
P60 and P61.
The motors which adjust
the horizonatl position are connected to pin 3 of the mirrors
P60 and P61.
According to the selector position, either
the left motors (output signals from pins 8 and 9 of control
H31) or the right motors (output signals from pins 7 and 10 of H31) are connected; the common supply comes out of pin 3 for H31 and is connected to pin 4 of the motors.
The mirrors are folded by motors connected
to pins 1 and 2 of
P60 and P61, which receive
the command from pins 5 and 11, (right) and 6 and 12 (left) respectively
for H31.
Switch
H31 is lit when the ignition
is switched on (INT/A).