2891298 - 1080B62 catalytic converter - r + r
Removing
(
Refitting
)
Place the car on a ramp.1. Undo the bolts securing the catalytic converter to the front
exhaust pipe.2. Remove the rubber block from its retaining stud.3. Unscrew bolt (3a) securing the catalytic converter to the rear
silencers, remove catalytic converter (3b) and recover gasket (3c).
Refitting
(
Removing
)
Fit the catalytic converter into its seat
on the rear silencers.Fit the stud to the rubber block.Tighten the rear catalytic converter retaining
bolt. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Nut | CATALYTIC CONVERTER (ONE) | - | 5.5 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | EXHAUST PIPE TO ENGINE | M8 | 2.4 |