2891654 - 3340B76 rigid pipe(one), lh or rh, to rear brake cylinder - r r
Removing
(
Refitting
)
Place the car on a ramp.1. Use wrench (1a) to disconnect rear brake pipe fitting (1b) from
the cylinder.2. Unscrew fitting (2a) and remove rigid pipe (2b) to the rear cylinder. | Name | Country |
|---|---|---|
| 1a | Box wrench for brake fittings | 1.856.132.000 |
Refitting
(
Removing
)
Fit the rigid pipe, tightening
the front fitting.Use the appropriate tool to tighten the
fitting for the rear brake pipe from the cylinder - 3330A18 front or rear hydraulic brake system - bleed
.
Refitting
(
Removing
)
Position the rigid pipe and
fasten it using the clip.Using the special tool, connect the connector
for the rigid pipe to the rear brake caliper flexible pipe and tighten
it to the recommended torque. | Name | Country |
|---|---|---|
| - | Box wrench for brake fittings | 1.856.132.000 |
 | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Connector | RIGID PIPE REAR CYLINDERS (ABS) | M10 x 1 | 1.6 |
| Name | Country |
|---|---|---|
| - | Box wrench for brake fittings | 1.856.132.000 |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Connector | RIGID PIPE REAR CYLINDERS (ABS) | M10 x 1 | 1.6 |
 | Name | Connector |
|---|---|---|
| - | Battery | A1 |