2891665 - 3380A38 link/cable connecting handbrake lever to cable - r+r

Removing ( Refitting ) 1. Open the left side door and remove the handbrake lever protective boot.2. Undo the adjustment nut (2a), then disconnect the cable (2b) from the handbrake lever. Place the car on a lift.Raise the ramp.1. Remove the cable guide support.2. Open the retaining band.3. Disconnect the two handbrake cables from the support.4. Remove the rod (4a), complete with support, recovering the cable guide boot (4b). Refitting ( Removing ) Fit the rod complete with support.Connect the two handbrake cables to the support.Close the band retaining the two cables.Fit the cable guide support.Lower the lift.Position the handbrake cable and tighten the adjustment nut without locking it. - 3380A04  handbrake - check travel