2892533 - E3032 DOOR MIRROR ADJUSTMENT - Functional description (SX setup, Right hand drive)

Functional description

The two-way switch controlling mirrors H30 operates electrical motors located in the right and left electrically-operated door mirrors P60 and P61 respectively. The switch is supplied when the ignition is switched on (INT/A) by the line for fuse B27 at pins 7 and 8 for H30 , whilst pin 5 is earthed. Operating the switch in one direction or the other, sends one of the two motors a positive and an earth signal, thereby determining the direction of rotation. The motors which adjust the vertical position are connected to pin 5 of the mirrors P60 and P61 , the motors which adjust the horizontal positino are connected to pin 3. According to the selector position, either the left motors (output signals from pins 1 and 3 of connector B for control H30 ) or the right motors (output signals from pins 2 and 4 of connector B for H30 ) are connected; the common supply comes out of pin 6 of H30 and is connected to pin 4 of motors P60 and P61 . The switch H30 is lit up when the ignition is switched on (INT/A).