The cigar lighter current socket
P50 is supplied to
pin 2 from the line for relay R1: the line is controlled by the
ignition INT/A and protected by fuse F15: both are
located in the junction unit B1.
The supply for the relay R1 comes from the
direct line of the maxifuse
J/B1 of B5,
whilst the coil is supplied by the line (INT/A) protected by the
fuse B26.
Pin 1 for the socket
P50 provides
the earth.
The ring nut for the current socket is lit
up (at pin 3) with the side lights on by means of the line coming
from the steering column switch unit
H5 switch and is
protected by the fuse F2
of the junction unit (
See
E2010
SIDE LIGHTS / NO. PLATE LIGHTS
).
As far as the other currents sockets
P51 and P52 are concerned, they are supplied at
pin 2 via the line for the relay J61.
This is supplied by the maxifuse
J/B2 line of B5, whilst the coil is supplied by the line controlled by the ignition
(INT/A) protected by the fuse B27.
The supply for the two current sockets is
then protected by the specific fuse
B15.