4130B20 POWER STEERING PUMP R R - Fiat - MULTIPLA - eLearn

2891691 - 4130B20 power steering pump r r

) Open the bonnet lid. - 1092C14 power steering pump/self levelling suspension pump pulley - r + r with belt removedUsing a syringe, drain the fluid from the power assisted steering reservoir.1. Remove the active charcoal filter (1a) from the fixing (1b) placing it outside of the working area.

1. Disconnect the two fluid supply and return pipes from the power assisted steering pump.2. Undo the bolts fixing the power assisted steering pump to the supports.3. Remove the power steering pump.

Refitting ( Removing

) Position the power assisted steering pump on the supports.Connect the two power assisted steering pump pipes.Tighten the bolts fixing the power assisted steering pump to the front and rear support to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	POWER STEERING PUMP	M8	2.5

Place the active charcoal filter in the special housing. - 1092C14 power steering pump/self levelling suspension pump pulley - r + r with belt removed - 4130B14 Power assisted steering fluid reservoir CAP - R.R. - Check level and top up if necessary.