2892065 - 7010A10 rear side door - adjust striker and adapt seal if necessary

Before altering the position of the door striker, ensure the door is properly aligned. Refer to op. 7010A14.1. Loosen the striker retaining screws.2. Use the bolt slots to move the striker into the correct position.

Fit shims if necessary in order to adjust the striker accurately. Permitted adjustment movements are indicated by arrows.

Tighten the screws.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	STRIKER ON REAR SIDE DOOR PILLAR	M8	2.2 - 2.6

Check the striker and catch fit together properly and ensure the door is aligned when closed.