2892196 - 7040H10 roof panel lining - r r
|  | Work cautiously so as not to dirty or damage the cover. | 
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	 - 7045A10  l/h or r/h front seat
(one) - r+r
                                           (left and right)
                                        - 7045A02  central front seat - r r - 7050A90  rear seat (one) - r re - repair with seat removed
                                           (all)
                                        - 7040H30  front pillar trim - r r
                                           (left
and right)
                                        - 3380A44  handbrake/linkage protection - r+r - 7040H34  central pillar trim - r r
                                           (left
and right)
                                        - 7040H42  rear pillar trim - r r
                                           (left
and right)
                                        - 7040G40  load compartment light bulb holder - r r - 7040B18  l/h or r/h side trim (one) of luggage compartment/load
platform - arrange
                                           (left and right)
                                        - 7040H33  glasses holder (1) lh or rh, on roof trim - r r
                                           (left
and right)
                                        - 7065C34  l/h or r/h sun blind (one) - r+r
                                           (left
and right)
                                        - 5580E22  Anti-theft device VOLUMETRIC SENSORS - R.R. after
checking electrical circuit - 7040E50  front modular courtesy light unit - r+r - 7065C30  interior l/h or r/h grab handle (one) - r+r
                                           (all)
                                        - 7040E17  lh or rh rear courtesy light - r r
                                           (left
and right)
                                       1. Undo the bolts on the seat belt cover.2. Remove the cover.3. Remove the seals of the 4 door frames near the ceiling trim.4. Remove the retainers using the appropriate tool.
		)
	 - 7045A10  l/h or r/h front seat
(one) - r+r
                                           (left and right)
                                        - 7045A02  central front seat - r r - 7050A90  rear seat (one) - r re - repair with seat removed
                                           (all)
                                        - 7040H30  front pillar trim - r r
                                           (left
and right)
                                        - 3380A44  handbrake/linkage protection - r+r - 7040H34  central pillar trim - r r
                                           (left
and right)
                                        - 7040H42  rear pillar trim - r r
                                           (left
and right)
                                        - 7040G40  load compartment light bulb holder - r r - 7040B18  l/h or r/h side trim (one) of luggage compartment/load
platform - arrange
                                           (left and right)
                                        - 7040H33  glasses holder (1) lh or rh, on roof trim - r r
                                           (left
and right)
                                        - 7065C34  l/h or r/h sun blind (one) - r+r
                                           (left
and right)
                                        - 5580E22  Anti-theft device VOLUMETRIC SENSORS - R.R. after
checking electrical circuit - 7040E50  front modular courtesy light unit - r+r - 7065C30  interior l/h or r/h grab handle (one) - r+r
                                           (all)
                                        - 7040E17  lh or rh rear courtesy light - r r
                                           (left
and right)
                                       1. Undo the bolts on the seat belt cover.2. Remove the cover.3. Remove the seals of the 4 door frames near the ceiling trim.4. Remove the retainers using the appropriate tool.|  | Name | Country | 
|---|---|---|
| 4 | Scraper blade | 1.878.077.000 | 

 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Check that the trim is undamaged.Fit the ceiling trim, inserting it into
the interior compartment through the front right door.Fit the retainers.Fit the 4 door frame seals.Fit the seat belt cover.Tighten the cover bolts. - 7040E17  lh or rh rear courtesy light - r r
                                           (left
and right)
                                        - 7065C30  interior l/h or r/h grab handle (one) - r+r
                                           (all)
                                        - 7040E50  front modular courtesy light unit - r+r - 5580E22  Anti-theft device VOLUMETRIC SENSORS - R.R. after
checking electrical circuit - 7065C34  l/h or r/h sun blind (one) - r+r
                                           (left
and right)
                                        - 7040H33  glasses holder (1) lh or rh, on roof trim - r r
                                           (left
and right)
                                        - 7040B18  l/h or r/h side trim (one) of luggage compartment/load
platform - arrange
                                           (left and right)
                                        - 7040G40  load compartment light bulb holder - r r - 7040H42  rear pillar trim - r r
                                           (left
and right)
                                        - 7040H34  central pillar trim - r r
                                           (left
and right)
                                        - 3380A44  handbrake/linkage protection - r+r - 7040H30  front pillar trim - r r
                                           (left
and right)
                                        - 7050A90  rear seat (one) - r re - repair with seat removed
                                           (all)
                                        - 7045A02  central front seat - r r - 7045A10  l/h or r/h front seat (one) - r+r
                                           (left
and right)
                                       Check that all the parts are fitted correctly
and check the operation of removed electrical components.
		)
	Check that the trim is undamaged.Fit the ceiling trim, inserting it into
the interior compartment through the front right door.Fit the retainers.Fit the 4 door frame seals.Fit the seat belt cover.Tighten the cover bolts. - 7040E17  lh or rh rear courtesy light - r r
                                           (left
and right)
                                        - 7065C30  interior l/h or r/h grab handle (one) - r+r
                                           (all)
                                        - 7040E50  front modular courtesy light unit - r+r - 5580E22  Anti-theft device VOLUMETRIC SENSORS - R.R. after
checking electrical circuit - 7065C34  l/h or r/h sun blind (one) - r+r
                                           (left
and right)
                                        - 7040H33  glasses holder (1) lh or rh, on roof trim - r r
                                           (left
and right)
                                        - 7040B18  l/h or r/h side trim (one) of luggage compartment/load
platform - arrange
                                           (left and right)
                                        - 7040G40  load compartment light bulb holder - r r - 7040H42  rear pillar trim - r r
                                           (left
and right)
                                        - 7040H34  central pillar trim - r r
                                           (left
and right)
                                        - 3380A44  handbrake/linkage protection - r+r - 7040H30  front pillar trim - r r
                                           (left
and right)
                                        - 7050A90  rear seat (one) - r re - repair with seat removed
                                           (all)
                                        - 7045A02  central front seat - r r - 7045A10  l/h or r/h front seat (one) - r+r
                                           (left
and right)
                                       Check that all the parts are fitted correctly
and check the operation of removed electrical components.