2891589 - 3310B57 rear calliper bracket - r r

Removing ( Refitting ) Place the car on the ramp.Disconnect the battery negative terminal.

	Name	Connector
-	Battery	A1

1. Working from inside the vehicle, remove the protective boot for the handbrake lever.2. Loosen the adjustment nut for the handbrake cable.  - 4450B11  WHEEL (one) rear - R.R.1. Release the handbrake cable and move aside.2. Unscrew brake caliper retaining bolts (2a) and remove caliper (2b). Release the rear brake pads.1. Undo the rear brake caliper bracket retaining bolts. Remove the caliper bracket. Refitting ( Removing ) Fit the caliper bracket.Tighten the bracket fixing bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR BRAKE CALIPER BRACKET	M12 x 1	10.5

Fit the rear brake pads.Refit the brake caliper and tighten the retaining bolts to torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR BRAKE CALIPER	M10	5.7

Connect the handbrake cable to the brake caliper. - 4450B11  WHEEL (one) rear - R.R.Lower the vehicle. - 3380A04  handbrake - check travelConnect the battery negative terminal.

	Name	Connector
-	Battery	A1

Remove the car from the ramps.